View SMT06C_4344663.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Embedded Power for Business-Critical Continuity
SMT06C Series
5 Vin and 12 Vin single output
Rev. 08.20.08_j93 SMT06C 1 of 4
Total Power: 20W Input Voltage: 4.5-5.5 Vdc or 10.2 - 13.8 Vdc # of Outputs: Single
Electrical Specifications
Special Features
* 6 A current rating * Input voltage range: 4.5 Vdc - 5.5 Vdc or 10.2 Vdc - 13.8 Vdc * Output voltage range: 0.9 Vdc - 3.3/5.0 Vdc * Industry leading value * Cost optimized design * Excellent transient response * Output voltage adjustability * Pathway for future upgrades * Supports silicon voltage migration * Resulting in reduced design-in and qualification time * Designed in reliability: MTBF of >7 million hours per Telcordia SR-332 * Available RoHS compliant * 2 year warranty
Output
Voltage adjustability (see note 6) 5 V input models 12 Vins Output setpoint accuracy 1.0% trim resistors Line regulation Load regulation Min/max load Overshoot (at turn on) Undershoot Ripple and noise 5 Hz to 20 MHz Transient response (see note 1) 5 V input models 12 V input models At turn-off (See note 2) Low line to high line Full load to min. load 0.9 - 3.3 Vdc 0.9 - 5.0 Vdc 2.5% 0.2% 0.5% 0A/6A 3.0% max. 1.0% max. 100 mV max. See table on page 2 75 mV max. deviation 150 s recovery to within regulation band
Safety
UL/cUL : CAN/CSA 22.2 No. 60950 TUV Product Service (EN60950:2000) CB report and certificate
Embedded Power for Business-Critical Continuity
All specifications are typical at nominal input, full load at 25C unless otherwise stated.
Rev. 08.20.08_j93 SMT06C 2 of 4
Input
Input voltage range Input current Input current (max.) (see note 8) Input reflected ripple (see note 2) Remote ON/OFF Logic compatibility ON OFF Start-up time (see note 3) Power up Remote ON/OFF Turn ON threshold Turn OFF threshold 5 Vin 12 Vin 5 Vin 12 Vin See table on page 2 Fixed (See note 4) 200 kHz. TUV product Services IEC69050, UL/cUL60950 UL94V-0 9.3 g (0.3 oz.) 150 m Telcordia SR-332 7,562,142 hours 5 V input model 12 V input model Minimum load Remote OFF 5 V input model 12 V input model 5 Vin 12 Vin 4.5 - 5.5 Vdc 10.2 - 13.8 Vdc 50 mA 5 mA 5.1 A max. @ lo max. 1.6 A @ lo max. 52 mA (pk-pk) 56 mA (pk-pk) Positive logic >2.4 Vdc <0.8 Vdc <20 ms <20 ms 4.5 Vdc typ. 9.3 Vdc typ. 4.3 Vdc typ. 7.8 Vdc typ.
General Specifications
Efficiency Switching frequency Approvals and standards Material flammability Weight Coplanarity MTBF
Environmental Specifications
Thermal performance (see note 9) Operating ambient, temperature Non-operating 0 C to +80 C -40 C to +125 C
Protection Short-circuit Recommended system capacitance Input capacitance Output capacitance (See note 10) (See note 10) 270 F/20 mW ESR max. 680 F/10 m W ESR max. Hiccup, non-latching
Embedded Power for Business-Critical Continuity
Ordering Information
Output Power (max) 20 W 30 W Input Voltage
4.5-5.5 Vdc 10.2 - 13.8 Vdc
Rev. 08.20.08_j93 SMT06C 3 of 4 Output Current (min) 0A 0A Output Current (max) 6A 6A Maximum Load (typ) 89% 91% Regulation Line
0.2% 0.2%
Output Voltage (11)
0.9-3.3 V 0.9-5.0 V
Model Numbers (12, 13) SMT06C-05SADJJ SMT06C-12SADJJ
Load
0.5% 0.5%
All specifications are typical at nominal input Vin = 12 V, full load at 25C unless otherwise stated.
Part Number System with Options
Product Family Rated Output Current Performance Input Voltage Number of Outputs Packaging Options
SMT
SMT = Surface Mount
06
06 = 6 A
C
C = C Series
12
05 = 4.5 Vdc to 5.5 Vdc 12 = 10.2 Vdc to 13.8 Vdc
SADJ
SADJ = Single Adjustable Output
J
J = PB-free (RoHS 6/6 compliant)
Output Voltage Adjustment of the SMT20C Series
The ultra-wide output voltage trim range offers major advantages to users who select the SMT06C series. It is no longer necessary to purchase a variety of modules in order to cover different output voltages. The output voltage can be trimmed in a range of 0.9 Vdc to 5.0 Vdc. When the SMT06C series converter leaves the factory the output has been adjusted to the default voltage of 0.9 V.
Notes
di/dt = 10 A/s, Vin = Nom, Tc = 25 C, load change = 0.50 lo max. to 0.75 lo max. and 0.75 lo max. to 0.5 lo max. 2 Measured with external filter. See Application Note 169 for details. 3 Power up is the time from application of dc input to Power Good high. Remote ON/OFF asserted high to Power Good high. 4 This product is only for inclusion by professional installers within other equipment and must not be operated as a stand alone product. 5 Measured as per recommended set-up. Cin = 270 F (20 mW ESR max.). Cout = 680 F (10 mW ESR max.). 6 Uses external resistor from trim to ground. Minimum value 485 W for 5 V model, 280 W for 12 V model. See Application Note 169 for details. 7 Signal line assumed <3 m. 8 External input fusing recommended. 9 See Application Note 169 for operation above 50 C. 10 See Application Note 169 for more details. 11 TSE RoHS 5/6 (non Pb-free) compliant versions may be available on special request, please contact your local sales representative for details. 12 NOTICE: Some models do not support all options. Please contact your local representative or use the on-line model number search tool at www.powerconversion.com to find a suitable alternative. 1
Ripple and Noise Specification Model 5 V input models 12 V input models Output Voltage 0.9 Vdc to 2.5 Vdc 3.3 Vdc 0.9 Vdc to 2.5 Vdc 3.3 Vdc to 5 Vdc Pk - Pk 30 mV 40 mV 40 mV 50 mV RMS 15 mV 15 mV 20 mV 20 mV
Embedded Power for Business-Critical Continuity
Mechanical Drawing
0.190 (4.83) 0.190 (4.83)
Americas
1.200 (30.48) 0.190 (4.83) PIN 2
0.190 (4.83)
5810 Van Allen Way Carlsbad, CA 92008 USA Telephone: +1 (760) 930 4600 Facsimile: +1 (760) 930 0698
0.310 (7.87) PIN 5
Rev. 08.20.08_j93 SMT06C 4 of 4
Europe (UK)
Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX United Kingdom Telephone: +44 (0) 1384 842 211 Facsimile: +44 (0) 1384 843 355
0.530 (13.46)
0.430 (10.93)
0.75 (1.90)
PIN 1 0.050 (1.27) PIN 6
Asia (HK)
14/F, Lu Plaza 2 Wing Yip Street Kwun Tong, Kowloon Hong Kong Telephone: +852 2176 3333 Facsimile: +852 2176 3888
0.466 (11.83) Installed Ht.
0.315 (8.00)
Seating Plane 0.062 (1.57) REF 6 x 0.089 (2.26) All dimensions in inches (mm) All tolerance 0.010in (0.25mm) unless otherwise stated
For global contact, visit:
0.019 (0.48) TYP
www.powerconversion.com technicalsupport@ powerconversion.com
While every precaution has been taken to ensure accuracy and completeness in this literature, Emerson Network Power assumes no responsibility, and disclaims all liability for damages resulting from use of this information or for any errors or omissions.
Pin connections
Pin Number Function
1 2 3 4 5 6
Remote ON/OFF Power Good Trim Vout GND Vin
Emerson Network Power. The global leader in enabling business-critical continuity. AC Power Connectivity DC Power Embedded Computing Embedded Power Monitoring Outside Plant Power Switching & Controls Precision Cooling Racks & Integrated Cabinets Services Surge Protection EmersonNetworkPower. com
Emerson Network Power and the Emerson Network Power logo are trademarks and service marks of Emerson Electric Co. (c)2008 Emerson Electric Co.

▲Up To Search▲

Price & Availability of SMT06C

	To Download SMT06C Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .